Dolomite White

Number.:

VIN-0015031

Name:

Dolomite White

Size:

270-320x160x1.2cm

Surface:

Polished/Matt/Soft-Polished

-Vinstone- Inquiry sintered stone

Click or drag files to this area to upload. You can upload up to 5 files.
You can send us your design photo. This is not necessary.
Vinstone Certifications
Our sintered stone has been tested by NSF for food safety and certificated by Green Guard, ensures that our product has met some of the world’s most rigorous and comprehensive standards for low emissions of volatile organic compounds (VOCs) into indoor air.Our products achieved above certifications.

Sintered Stone VS Natural Marble

Most of our products are designed in Italy, produced with Italian and German machines, Spanish glaze, German ink and a complete set of the most advanced equipment.

-Vinstone- Technology sintered stone

1) Cutting sequence: the green line is the first cut, the red line is the second cut, and the last hole is dug.

2) If there is a bridge cutting machine and the four sides do not need to be chamfered, you can cut the green line and the red line with the bridge cutting machine and then dig the hole.

3) In case of hole digging crack, please dig 4 small circles with diameter of 30mm as shown in the figure before digging.

Note: Since the order placing position is outside the plate, the plate used to determine the origin and other plates beside it shall not be higher than the plate to be cut.

-----Handling-----
1) The manual suction tray can be installed on the other side of the big board for easy movement.

2) Install the metal support on the back of the big board, and fix rt on the big board to increase the stability of the big board.

3) It is suggested that truck transportation and forklift trucks be lifted to reduce the damage of the fixed plate.

-----Driling-----
1) The manual cutting machine can cut the square adjusting holes on the large plate at any time.

2) Use a glass knife that cuts straight lines to cut down on the glaze of a large plate for easy cutting.

3) Once the ceramic plate is drilled or cut, It must be carefulty handled and placed.

-----Cutting-----
1) It is suggested that the cutting route should be planned before cutting the big board.

2) Use a glass knife that cuts straight lines to cut down on the glaze of a large plate for easy cutting.

3) Use the cutting machine to cut along the cutting line, grinding paper to smooth the sharp edges.

-----Paving-----
1) Use the scraper to spread the adhesive on the floor and the big board, and smear it flat to facilitate the placement.

2) After big board paving, please reserve 2mm space to prevent cold shrink and heat rise.

3) After laying, the large plate is compacted, so that the inner layer is completely combined to ensure smooth surface.

Sintered Stone VS Natural Marble

Vinstone Certifications
Our sintered stone has been tested by NSF for food safety and certificated by Green Guard, ensures that our product has met some of the world’s most rigorous and comprehensive standards for low emissions of volatile organic compounds (VOCs) into indoor air.Our products achieved above certifications.
Most of our products are designed in Italy, produced with Italian and German machines, Spanish glaze, German ink and a complete set of the most advanced equipment.

-Vinstone- Technology sintered stone

1) Cutting sequence: the green line is the first cut, the red line is the second cut, and the last hole is dug.

2) If there is a bridge cutting machine and the four sides do not need to be chamfered, you can cut the green line and the red line with the bridge cutting machine and then dig the hole.

3) In case of hole digging crack, please dig 4 small circles with diameter of 30mm as shown in the figure before digging.

Note: Since the order placing position is outside the plate, the plate used to determine the origin and other plates beside it shall not be higher than the plate to be cut.

-----Handling-----
1) The manual suction tray can be installed on the other side of the big board for easy movement.

2) Install the metal support on the back of the big board, and fix rt on the big board to increase the stability of the big board.

3) It is suggested that truck transportation and forklift trucks be lifted to reduce the damage of the fixed plate.

-----Driling-----
1) The manual cutting machine can cut the square adjusting holes on the large plate at any time.

2) Use a glass knife that cuts straight lines to cut down on the glaze of a large plate for easy cutting.

3) Once the ceramic plate is drilled or cut, It must be carefulty handled and placed.

-----Cutting-----
1) It is suggested that the cutting route should be planned before cutting the big board.

2) Use a glass knife that cuts straight lines to cut down on the glaze of a large plate for easy cutting.

3) Use the cutting machine to cut along the cutting line, grinding paper to smooth the sharp edges.

-----Paving-----
1) Use the scraper to spread the adhesive on the floor and the big board, and smear it flat to facilitate the placement.

2) After big board paving, please reserve 2mm space to prevent cold shrink and heat rise.

3) After laying, the large plate is compacted, so that the inner layer is completely combined to ensure smooth surface.

Product Library

QR Code
QR Code

Five-Year Quality Assurance

There is no reason to return or replace the goods with quality problems within 5 years.

More + Choices

More + Choices

Jumbo Size 270-320x160x1.2cm

Product Performance

Great Quality

Italian Design & Spanish Glaze

Italian Design

Spanish Glaze

Partial Applications

Image hover effect image

PLATFORM

Italian Design Spanish glaze

Image hover effect image

TABLE

Italian Design Spanish glaze

Image hover effect image

wardrobe

Italian Design Spanish glaze

Image hover effect image

wall

Italian Design Spanish glaze

Image hover effect image

countertop

Italian Design Spanish glaze

Image hover effect image

kitchen

Italian Design Spanish glaze

Image hover effect image

Bathroom

Italian Design Spanish glaze

Image hover effect image

stair

Italian Design Spanish glaze

Image hover effect image

floor

Italian Design Spanish glaze

Image hover effect image

Closet

Italian Design Spanish glaze

Image hover effect image

Exterior Facade

Italian Design Spanish glaze

Image hover effect image

Vanity Top

Italian Design Spanish glaze

0